The Cisco CCIE Routing and Switching Lab Exam version 5.0 is considered to be an eight-hour, a hands-on exam that requires a candidate to plan, design, implement, operate, and troubleshoot complex security scenarios for a given specification. Knowledge of troubleshooting is considered to be an important skill as well as candidates would be expected to diagnose and solve issues as part of the CCIE Routing and Switching lab exam. CCIE R&S Lab Exam consists of 3 Sections and we are going to discuss one of them, which would be the Configuration Section. Also, you are going to need a good and latest reliable exam dumps, like that offered by the SPOTO Club, if you wish to clear the CCIE R&S Lab Exam in a single attempt.
CCIE R&S v5 Lab Configuration module:
The Configuration module would be providing you set up very close to an actual production network which would be having various security components providing various layers of security at different points in the network. Though the major part of the module is based on virtual instances of the Cisco security appliances, the candidate may be asked to work with physical devices as well. At the very beginning of the module, the candidate would be having the full visibility of the entire module. A candidate could choose to work in the sequence in which the items are going to be presented or could resolve items in whatever order it would seem to be preferable and logical.
When working in the Troubleshooting module, the candidate could choose to borrow up to 30-minutes from the five hours which are going to be allotted for the Configuration module. The result is that the total time the candidate would have to complete the Configuration module would only be four-plus one-half hours (4.5 hours).
To maintain the total exam time to eight hours, the optional 30- minutes the candidate decided to use in the Troubleshooting module is deducted automatically from the time originally allocated for the Configuration module.
The web-based delivery system will display a warning message when the two hours have expired in the Troubleshooting module. The system will then ask if the candidate wants to proceed in the Troubleshooting module, adding up to extra 30 minutes before advancing to the next module, or if the candidate desires to stop working on the Troubleshooting module as well as advance to the Diagnostic module.
To pass the CCIE R&S lab exam, the candidates are going to be required to meet these two conditions:
- The total sum of all modules should be equal at least the minimum overall cut-score.
- The sum for each individual module should be equals at least the minimum cut score for the module.
The reason for these criteria would be to prevent the candidate from clearing the lab exam while failing or even bypassing a module, for instance, the Diagnostic module.
Well, I would suggest that if you wish to gain the CCIE R&S Certification, you should check out the study materials, which are being offered at the SPOTO Club.
SPOTO Club Materials 100% Cover Real Exam
After long-term testing, SPOTO Club achieves its Lab materials accurate rate up to 100% cover exam.
96.8% First-Attempt Pass Rate
SPOTO Club helped over 1688 members get their CCIE certification until 22nd May 2019, first attempt pass-rate over 96.8%, which is far higher than other vendors. According to statics show that average one candidate need to take 2-3 times exam to get their CCIE certification, whereas you can pass at first try if you pass SPOTO Club all sections & mock tests