- Workbook & Solution & Tutorial Video
- Mock Lab Exam Environment
- Free Update During Service Duration
- 7/24 CCIE Instructors Online Support
- Workbook 100% Cover Real Lab Exam
- Latest Pass Lab Exam Feedbacks
- Free Update During Service Duration
- 1342+ CCIE LAB members Passed with SPOTO
SPOTO Materials 100% Cover Real Exam
After long-term testing, SPOTO achieve its Lab materials accurate rate up to 100% cover exam. Our materials are highly recommended by SPOTO VIP members and candidates from 133 countries
Prerequisite: Pass CCIE RS Written Exam
SPOTO offers materials that all you need to prepare & pass your lab exam. With the data shows that SPOTO helped over 1342 members to obtain their CCIE Certification, 35.6% members are fresh network engineers. You can pass your RS Lab exam at first try as long as you practice whole materials we offer and get a good score on SPOTO every sections exam and mock exam.
You can complete CCIE R&S Lab online training within 12 weeks if you practice lab materials 3 hours per day. Tutors and services will assist you along the whole preparation. Every module we do provide workbooks, solutions, and videos tutorial. You can watch videos first, and practice materials.
3 weeks to practice TS module: TS1, TS2, TS new version
2 days to practice DIAG module: DIAG1~DIAG8
6.5 weeks to practice CFG module: H1, H1+, H2, H2+, H3
2 weeks to review and practice final RS Lab mock exam
SPOTO offers all materials that you need to prepare CCIE RS Lab exam. You can easily pass exam within two to five months if you prepare with SPOTO complete & latest Lab materials.SPOTO CCIE Lab preparation materials include Lab workbooks, solutions, tutorial videos, module tests, mock exam and exam feedback.
- CCIE Lab Workbooks
100% cover real exam: the content of SPOTO materials will exactly the same in the exam
- CCIE Lab Solutions
Guarantee 100% pass exam: You can pass exam at first try as long as you remember & digest all solutions
- Module Tests
Test Your Ability: every module (TS, DIAG, CFG) with module test, If you pass module tests, you can go next module practice.
- Tutorial Videos
Explain Lively: tutor will show you details about how to conduct on every module practice.
- Mock Exam
Simulate Real Exam: We are encouraged to say that if you pass the mock exam, you can pass the lab exam.
- Exam Feedback
Exam Latest Info: We offer the details feedbacks of how candidates pass CCIE exam around the world.
SPOTO CCIE R&S lab exam material includes 3 modules: TS, DIAG and CFG.
Here are the details:
TS: 2 Sets TS1, TS2
DIAG: 8 Sets DIAG 1-DIAG 8
CFG: 3 Sets H1 H1+ CFG, H2 H2+ CFG, H3 CFG
After you choose SPOTO CCIE Routing and Switching V5.0 lab study materials, we can help you to complete CCIE R&S Lab online training within 12 weeks. If you can practice lab materials 3 hours per day, tutors and services will assist you along with the whole preparation. Every module we do provide workbooks, solutions, and tutorial videos. You can watch videos first, and practice materials.
Step 1: Two weeks to practice H2 CFG
Step 2: Two weeks to practice TS1
Step 3: Two weeks to practice CFG H1, H1
Step 4: Five days to practice all incidents of TS2
Step 5: Two days to practice DIAG
Step 6: One week to practice CFG H2+
Step 7: You can access to H3 CFG+, TS2 new faults after you compete phase1 to phase6
Step 8: Two weeks to review
Step 9: We will provide a DIAG VCE test 10 days before your Lab exam
Introduction of CCIE R&S H3 CFG-SPOTO
Q1:Layer 2(2 point)
PC101 should successfully access Server 1 behind SW1.
PC101 cannot access R7/R8, fix the problem so that PC101 can ping R7.
switch access vlan 100
router ospf 65100
no passive-interface vlan12
Customer just setup a IPv6 Network, with HSRPv6 on R1 & R2.
After setting up, all hosts lose connection.
What would you recommend to your L1 Engineer as a Quick Fix?
CE1 key configuration
- standby 1 priority 200
- standby 1 preempt
- ipv6 nd router-preference low
CE2 key configuration
- standby 1 preempt
- ipv6 nd router-preference high
CE1 HSRP priority is 200, Active
CE2 HSRP priority is 100, Standby
host had the default route FE80::666.
Customer just setup a lPv6 Network, with HSRPv6 onR1 & R2.
After setting up, all hosts lose connection.
Q1:What would you recommend to your L1 Engineer as a Quick Fix?
Q2:What is the root cause of the problem caused by the current? Which Device
Q3:Choose the first frame id that demonstrate your doubt
Section 1 Layer 2 Technologies
Section 1.1: LAN Access
The following requirements were pre-configured.
- VTP is turned off in all switches.
- All required VLAN, including access-ports configuration in all relevant switches are provisioned.
- All required SVI interfaces in all relevant switches (including IP address and subnet mask) are provisioned.
Configure the network in all sites as per the following requirements:
- Access-ports must immediately transition to the forwarding state upon link up, as long as they do not receive a BPDU. Use the minimal number of commands per switch to enable this feature.
- If an access-port receives a BPDU, it must automatically shutdown. Use the minimal number of commands per switch to enable this feature.
- Ports that were shutdown must attempt to automatically recover after 10 minutes.
- None of the switches may generate a TC when any of access ports goes down.
Section 1.2: LAN Distribution
- Configure the headquarters’ network, as well as the large and medium office networks as per the following requirements:
- All trunks must always use dot1Q encapsulation.
- Negotiation of trunking protocol must be disabled in all switches.
- Distribution switches (SW300, SW301, SW400, SW401, SW500, SW501) must initiate etherchannel negotiation using LACP.
- Access switches (SW310, SW410, SW510) must never initiate etherchannel negotiation.
- Configure layer 2 etherchannels’ number as shown in the “Diagram 1: Main topology” and “Diagram 5: Layer 2 Connections” (that is, use only Po1 and/or Po2).
- Ensure that all ports included in etherchannels are effectively in use and bundled in the expected channel.
- Access switches must see similar output as shown below:
Section 1.3: LAN Resiliency: Spanning-Tree
Section 1.4: WAN Switching Technologies
1. How soon can I receive the CCIE R&S Lab v5.0 materials?
The followings will be sent to your email no later than 8 hours after verification of your payment.
-Software and setup instructions
-SPOTO CCIE R&S Lab Exam v5.0 Learning Materials, including Workbooks, Solutions, and Instruction Video. (except H3 CFG, TS2 BT1 workbook and solutions)
-CCIE R&S Lab Exam v5.0 Study Plan.
2. When can I access R&S H3 server to practice H3 CFG and TS2 BT1?
a、If this is your first attempt on the lab exam, we highly recommend that you read the CCIE R&S Lab v5.0 study plan. Complete other CFG and TS on your laptop first.
b、If you already attempted before, we suggest you try to pass our virtual exam (contact our tutor for access) before scheduling your CCIE R&S LAB Exam date and start practicing H3 CFG.
3. How many remote lab hours are included for H3 CFG and TS2 BT1?
Up to 200 hours within your service period. You can purchase additional hours at USD$ 200 per 40 hours within your service period. Please contact our tutor for server hour suspension.
4. When can I access DIAG server?
10 days before your exam during your service period. Please contact our tutor to authorize your access. But You will need to provide schedule screenshot (OLSM website screenshot) or payment invoice.
5. What kind of PC do I need to prepare the CCIE R&S Lab exam v5.0?
Minimum PC Specification for CCIE LAB practice
CPU: More Than the 2.5GHZ
RAM: 12 GB
Hard Drive: 100GB
Network: internet access
Software: Windows 7 or later (except Server OS) and Mac OS
6. How long is my service period?
Our standard service period is 5 months. In case you failed your first LAB-attempt within our standard 5 months, we will extend it to 6 months free of charge providing that you send us proof of your first failure, such as result screenshots with your full name on it. Please note we will stop all your services 3 days after your exam date if we were not notified of your free extension request.
You can also purchase an additional month at USD $400 per month for a maximum of 4 additional months. You must apply within 2 months after your original service period expired, otherwise you have to re-purchase our standard service. In case you need a break during your service period, you can apply for account suspension for a minimal of 7 days. Please contact our tutor for any extension and suspension request.
We reserve the rights to terminate all the services in case we learned you have been sharing our materials with others. Thank you for your understanding.
7. What happens if the exam becomes unstable?
We make sure you will receive updated information and materials of the CCIE R&S Lab exam as soon as we learned any changes to the exam. In case we learned any major changes happened during your service period, your remaining service period will be calculated from the date we learned the exam becomes stable again.
Note: If you want to know more latest feedbacks of CCIE Routing and Switching lab exam, please contact us.
Matched mac address on SW and PC.
R17: ppp ipcp route default is missing
Wrong mask length on R22.
R3 has deny ospf acl
R13 had deny prefix . i had to remove that line
R5: had many missing neighbors. I had configured them all
R21: modified to negh x route-map x in
R25:didnot have neighbor activated under ipv6, activated it
R19 tunnel has missing config. added them to match with R15
R7,R8- Missing neighbors configuration
R3: one interface was not part of VRF. Configured the interface accordingly
R4/R6: ip ospf cost 1000 on int e2/0
Tunnel 10 had ospf broadcast.
R21 had ACL and i had to put permit ip any any
R24 e2/0 had IP of NAS as secondary IP. Removed secondary IP.
H2- Same as spoto but each questions had more options than what we had on RDP.
SEC1: Same as spoto but i had to bounce por-channels on SW300,301,310 after i configured MST. PO were not in a consistant state
2.1 Same as spoto
2.2 Same as spoto
2.3 Same as spoto
2.4 Same as spoto
2.5 Same as spoto
2.6 Same as spoto
2.7 Same as spoto
2.8 Same as spoto
2.9- Same as spoto- ipv6 unicast routing is not enable on SW111
2.10 &2.11 – Mutlicasting is same as spoto but ip multicast-routing is not enabled on all devices. It took some time to see things stable.
3.1 . SAME as spoto. Only OSPF is preconfigured. had to configure RD, MPLS, BGP
3.2 Same as spoto. Crypto was not configured properly on R51 & R60. Matched it with R14.
3.3 same as spoto
3.4 Same as spoto
4.1 Same as spoto
4.2 Same as spoto
SEC5: All same as Spoto . I didnot configure EEM script
Latest Passing Reports from SPOTO Candidates
CCIE Routing and Switching Lab exam need you to master the ability that configures actual equipment and troubleshoots the network in a timed test condition. This exam validates all candidates go thorough knowledge of diagnosing, troubleshooting, solving of all issues which are a part of the CCIE Lab exam. Candidates need to pass your CCIE R&S lab exam within 18 months after you pass the CCIE R&S written exam. Most people will tend to choose SPOTO to study the CCIE lab. SPOTO offers a complete set CCIE R&S lab study materials to help our candidates save the money to get their CCIE number. It’s a potentially big investment. Contact us to know more details!