Download Free CCNA Exam Questions Demo and Practice Tests | Updated 2024

Our CCNA Certified test dumps have been cracked by professionals who already hold CCNA certification and are regularly updated to reflect any changes that may have been made to the CCNA exam. Our CCNA exam dumps contain 200 questions and answers, which you can use to test your knowledge on a variety of topics connected to the certification.

Question 1

Which statement is true regarding classless routing protocols? (Choose two.) 

A. The use of discontiguous networks is not allowed.

B. The use of Variable Length Subnet Masks is permitted.

C. RIPv1 is a classless routing protocol.

D. IGRP supports classless routing within the same autonomous system.

E. RIPv2 supports classless routing.

 

Correct answer:BE

 

Question 2

Which two of the following are true regarding the distance-vector and link-state routing protocols?

A. Link state sends its complete routing table out all active interfaces at periodic time intervals.

B. Distance vector sends its complete routing table out all active interfaces at periodic time intervals.

C. Link state sends updates containing the state of its own links to all routers in the internetwork.

D. Distance vector sends updates containing the state of its own links to all routers in the internetwork.

Correct answer: BC

 

Question 3

Which command displays RIP routing updates?

A. show ip route

B. debug ip rip

C. show protocols

D. debug ip route

 

Correct answer: B

 

Question 4

What does RIPv2 use to prevent routing loops? (Choose two.)

A. CIDR

B. Split horizon

C. Authentication

D. Classless masking

E. Holddown timers

 

Correct answer: BE

 

Question 5

 

A network administrator views the output from the show ip route command. A network that is advertised by both RIP and EIGRP appears in the

routing table flagged as an EIGRP route. Why is the RIP route to this network not used in the routing table?

A. EIGRP has a faster update timer.

B. EIGRP has a lower administrative distance.

C. RIP has a higher metric value for that route.

D. The EIGRP route has fewer hops.

E. The RIP path has a routing loop.

 

Correct answer: B

 

Question 6

 

You type debug ip rip on your router console and see that 172.16.10.0 is being advertised to you with a metric of 16. What does this mean?

A. The route is 16 hops away.

B. The route has a delay of 16 microseconds.

C. The route is inaccessible.

D. The route is queued at 16 messages a second. 

 

Correct answer: C

 

Question 7

 

What metric does RIPv2 use to find the best path to a remote network?

A. Hop count

B. MTU

C. Cumulative interface delay

D. Load

E. Path bandwidth value

 

Correct answer:A

 

Question 8

The Corporate router receives an IP packet with a source IP address of 192.168.214.20 and a destination address of 192.168.22.3. Lookingat the output from the Corporate router, what will the router do with this packet?

Corp#sh ip route

[output cut]

R 192.168.215.0 [120/2] via 192.168.20.2, 00:00:23, Serial0/0

R 192.168.115.0 [120/1] via 192.168.20.2, 00:00:23, Serial0/0

R 192.168.30.0 [120/1] via 192.168.20.2, 00:00:23, Serial0/0

C 192.168.20.0 is directly connected, Serial0/0

C 192.168.214.0 is directly connected, FastEthernet0/0

 

A. The packet will be discarded.

B. The packet will be routed out the S0/0 interface.

C. The router will broadcast looking for the destination.

D. The packet will be routed out the Fa0/0 interface. 

 

Correct answer: A

 

Question 9

 

If your routing table has a static, a RIP, and an EIGRP route to the same network, which route will be used to route packets by default?

A. Any available route

B. RIP route

C. Static route

D. EIGRP route

E. They will all load-balance.

  

Correct answer: C

 

Question 10

 

You have the following routing table. Which of the following networks will not be placed in the neighbor routing table?

R 192.168.30.0/24 [120/1] via 192.168.40.1, 00:00:12, Serial0

C 192.168.40.0/24 is directly connected, Serial0

172.16.0.0/24 is subnetted, 1 subnets

C 172.16.30.0 is directly connected, Loopback0

R 192.168.20.0/24 [120/1] via 192.168.40.1, 00:00:12, Serial0

R 10.0.0.0/8 [120/15] via 192.168.40.1, 00:00:07, Serial0

C 192.168.50.0/24 is directly connected, Ethernet0

A. 172.16.30.0

B. 192.168.30.0

C. 10.0.0.0

D. All of them will be placed in the neighbor routing table.

 

Correct answer: C

 

Gaining competency in Cloud, DevOps, and Cloud will be possible for you through the CCNA certification program. You will be working on real-world projects on AWS and Azure to gain a mastery of the most effective cloud platforms. In this Cloud Architect course, you will learn how to construct applications using AWS, GCP, and Azure. After that, you will be able to achieve expert status in that field.

Latest SPOTO Candidates Pass Feedback